Also, when you wash her vagina out, I highly recommend using tampons. two at a time, one behind the other. It will really help dry it out after using the pump.
@Thanos neither did I until I started doing research before buying my doll! I was cleaning my doll tonight and I also want to recommend using a spray bottle when cleaning the outside of her, after drying using baby powder and a brush to brush it over her, wow it makes a difference in how clean, soft and smooth she feels!
i i did a lot of research about this before I bought my doll. I read that you should clean here after each use by washing out the vagina or wherever you like to go on her with warm water and a soft soap mixture. Don’t use dish soap is what I read, odorless antibacterial soap is best. Also once a month it’s good to wash her entire body With soft soap, dry her off then use baby oil to cover her one side at a time, letting it soak in for 3 hours between sides. I also read to watch out for dark clothing because tpe is very porous and can soak up some of the ink. wash any new clothes before you put them on her and stick to light colored clothes if you can. If you like dark clothing just don’t leave her in it for long periods of time. anyway, I hope this helps. This is my first doll so I’m trying to be extra careful and learn everything I can .
I have been lucky enough to only need to clean mine with a 1:5 laundry detergent to water mixture, and only after I "use" her. I bought a cheap spray bottle and shoot the stream of cleaning solution right into her vag. I then use the included irrigator bulb to flush her with fresh water, after dumping the cleaning solution/ body fluid out of her. After a few rinse flushes, I dump everything out a final time and wipe her with a wet wash cloth. I then powder her with baby powder and a makeup brush. Finally, I return her to laying on her back- and put the tube for the USB aquarium pump in her vagina. A second pump is used for her mouth. I run those for a couple days to make sure she is dried out completely before removing the pumps. Voila!
Also, when you wash her vagina out, I highly recommend using tampons. two at a time, one behind the other. It will really help dry it out after using the pump.
i i did a lot of research about this before I bought my doll. I read that you should clean here after each use by washing out the vagina or wherever you like to go on her with warm water and a soft soap mixture. Don’t use dish soap is what I read, odorless antibacterial soap is best. Also once a month it’s good to wash her entire body With soft soap, dry her off then use baby oil to cover her one side at a time, letting it soak in for 3 hours between sides. I also read to watch out for dark clothing because tpe is very porous and can soak up some of the ink. wash any new clothes before you put them on her and stick to light colored clothes if you can. If you like dark clothing just don’t leave her in it for long periods of time. anyway, I hope this helps. This is my first doll so I’m trying to be extra careful and learn everything I can .
I have been lucky enough to only need to clean mine with a 1:5 laundry detergent to water mixture, and only after I "use" her. I bought a cheap spray bottle and shoot the stream of cleaning solution right into her vag. I then use the included irrigator bulb to flush her with fresh water, after dumping the cleaning solution/ body fluid out of her. After a few rinse flushes, I dump everything out a final time and wipe her with a wet wash cloth. I then powder her with baby powder and a makeup brush. Finally, I return her to laying on her back- and put the tube for the USB aquarium pump in her vagina. A second pump is used for her mouth. I run those for a couple days to make sure she is dried out completely before removing the pumps. Voila!